Tilt and Slide Patio Door Repairs

A functional tilt and slide patio door provides fresh air, light and a smooth transition between indoors and out. Modern aluminum doors offer strength and durability as well as thermal integrity, and a variety of glass options for an array of styles.

Dirty tracks and rollers are the main cause of sliding door problems. Cleaning and lubricating these moving parts regularly can keep your door functioning well.

Track and Roller Replacement

Tracks and rollers are main elements of sliding door functionality. They are located at the bottom of a door made of aluminum and rest on a track that allows them to move when they open and close. Over time, dirt can cause the tracks to get blocked and cause the rollers to become damaged. Keeping your patio door clean and well-lubricated will help avoid these problems.

Unless the track is badly bent, it is usually possible to repair the track and rollers, without taking the door off. You can ask a friend to assist you in lifting the panel off the track by bending it towards you (Photo 3). It may take some effort because the panels can be heavy. Once the panel has been removed, lay the panel flat on the sawhorses to examine the rollers. Replace them if they are damaged by purchasing a new set. You can also alter the height of the rollers by turning the adjustment screwsusually located in slots along the edges of the door panel.

If the rollers are in good condition, they may simply need to be cleaned or lubricated. Remove the rollers using the help of a screwdriver, and then clean them with denatured alcohol. This will eliminate any caked-on dirt and grime that may be creating resistance. After carefully putting each roller into its slot completely retract it using the adjustment screw. And lastly spray the rollers using silicone spray. This type of lubricant doesn't retain dirt like petroleum-based products, and will help your door glide smoothly.

After cleaning the rollers and installing them, you can put the door back in place and check it to ensure that the track is properly aligned with the rollers and the doors are sliding smoothly. Contact an authorized dealer in your area if you need help. Keep your doors clean and lubricated to extend their life and decrease the need for repairs. We recommend a silicone lubricant, as it will not attract dirt like WD-40. It is recommended to lubricate your rollers and tracks at least once every month.

Insect Screen Replacement

Sliding patio doors are great to maximize the floor area, allowing for airflow and allowing in beautiful views. However, they can also be difficult if their mechanism ceases functioning or isn't working correctly. Fortunately, the majority of issues with sliding screen doors can be easily resolved. Dirty rollers due to debris in the track, or a wrinkly window are among the most frequent issues. However you can fix them with these simple steps.

If your screen is sliding or wrinkled, you must first lay the frame down on a flat work surface and place a 1x4 board under each end to put some slight bows in the middle. This will allow you to make the screen more rigid and straighten it.

Be sure to buy a replacement screen that's a couple of inches larger than the frame's opening in both directions. You'll be able reduce any excess. Also, make sure to press the one end of the rubber spline into your channel using the spline rolling tool. After you've done this, it's time to roll in the rest of your spline.

Adjusting the Panel

In contrast to traditional sliding doors that open by turning the handle tilt and slide patio sliding doors repair door mechanisms allow you to keep the doors open for ventilation and keep your children and pets out of your living space. The doors require more force to open than you think. In time this can result in increased friction and crooked tracks, or misalignments, which could cause the door to not work. A quick detection and minor adjustments are often able to solve these problems, reducing the cost of replacement hardware.

The first step to adjusting a tilt-and-slide patio sliding door repair door is removing the panel. Place it on an even surface. Once the panels are removed, use a screwdriver to remove the plastic caps that cover each of the adjustment rollers. After the plastic holes are removed, you can make use of a long shafted screwdriver to pull the adjuster out of its channel. After removing the adjuster, clean it using denatured or ruby alcohol. This will eliminate any dirt that could be creating resistance and allow the roller to easily retract into its channel once the process is complete.

When reinstalling a movable panel align it with the frame and then use the drill to drive the screws along the flange. Attach the flange securely to the door's edge, ensuring that the flaps orient correctly. Once the movable panels are in place apply silicone-based lubricant onto the top track block for the arm connector as well as the lead Bogie wheels, and the slave Bogie wheels and then replace the cap on the hole made of plastic.

Repeat the process for two additional movable panels to restore their slide functionality and install the flanges made of plastic. Finally, attach the jamb side strip to the corresponding fixed panel with a plastic adhesive. Reattach the handle once the glue has dried and test the smoothness of the process. If you find any issues, you can adjust the lead Bogie wheel by taking it out of its channel, cleaning it and reinstalling it with a bead of silicone-based grease.

Charley Bar Installation

A patio door is a great option to let your pet into and out of the house, but it can also be a access point for burglars. You can take steps to increase the security of your patio door by installing pin locks or the Charley bar. These locks provide a blend of security and convenience that is unmatched by any other product available.

The charley bar is an excellent alternative for your sliding glass door, and it can be installed easily at home. The charley bar is installed in the center of your door and prevents the patio door from being jibbered open with tools or other objects like a hockey stick or broom handle. The charley bar is made of injection-molded polycarbonate, and extruded RPVC tubes that telescoping, making it strong and durable.

To install the charley bar, first ensure that it is the correct length for your door by measuring horizontally from the edge of the sliding door track to the sliding glass patio door. Mark the locations with an eraser where the charley bars will be installed. Use an eighth-inch bit to make holes in the wall jambs and frame of the patio doors, but be careful not to damage the glass of the patio doors. Finally, put the screws that came with the charley bar and make sure they are tightened securely.

The charley bars are a great option for sliding glass patio doors or sash windows. This simple security device will keep your Sliding Glass Patio Doors Repair patio door safe and burglar proof for years to come. It is made of injection-molded polycarbonate, and it has been tested by Intertek to withstand more than 400 pounds of pressure. Additionally the charley bar can be locked using the key that is included with it. It is easy-to-install and stays away from danger when it's not in use. You can buy the charley bar at most hardware stores. If you are looking for a charley bar that works, purchase it from an online retailer.