Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However, if you have double glazed window repairs-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards fall onto the cloth instead of onto the floor where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the window and the door is substantial, you may want to use security screens that has windows. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows so you can get at the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform an initial test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed window repairs glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with the breeze. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier with someone else to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for upvc window repairs the arrow on each hinge, this indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges because of wear and tear, could become misaligned. This causes an opening to appear where the sash meets the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

One of the most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert immediately.