Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is large, you might want to use a security screen that also includes an opening. This will provide the best of both.

2. Sagging

upvc repairs windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act as soon as you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. With the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges, uPVC repair you might require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need close the window and perform an experiment fit. The corner joints of the sash must align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the old caulking may require removal before a new layer can be applied. When it is time to uPVC repair, you should be careful not to over-caulk. This will make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or UPVC repair sagging. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with an ease. They can be easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a very simple procedure, but it is easier when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also be unbalanced due to wear, creating an opening where the sash meets frame. These can be easily repaired by giving them good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. Second, the interlock can be misaligned. This happens on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace these.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be positioned on the top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.