Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However when windows with double panes are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the Window Repair frame.

If you plan to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the fabric instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the distance between the door and the window is substantial, you may want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging uPVC window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any DIY expert. Based on the severity of the issue the caulking used previously may require removal before a new layer is applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal than the frame. This can be easily corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease, it may be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier to do with someone else to help hold the frame in place.

Verify that the uPVC hinges are closed and open in the correct direction. You can do this by looking for the arrows on each hinge, this shows which way the window should open.

The issue could be caused by opening the window repairs near me improperly or a faulty installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give suggestions.

It is also crucial to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, causing an opening where the sash and frame meet. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them aligned or replaced. In addition, Window Repair the interlock could be misaligned. This happens on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

The next most common reason for draughts is window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.