Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames of the past easily. However If windows with double panes are anchored by internal beading it will be more difficult to take out the existing panes and install new ones. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall on the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in place.

If you can't reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. The majority of the time this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC Window doctor near me repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window doctor is difficult to open or if it blows open with a breeze. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical component, hinges can wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photo through our website and window doctor near Me we will be more than happy to give you suggestions.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become misaligned due to wear, causing a gap between the frame and sash. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be possible to just give them a clean but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide excellent insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come the point when it's more efficient to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as you can.