double glazing repair Glazing Lock Repairs

The use of high-quality locks on your windows and doors will stop burglars from accessing your home. In general, they don't enjoy breaking glass or squeezing through windows that are not closed.

Certain double glazing owners however, have had issues with their window or door lock following the installation. These issues can be fixed without the need for new double glazing.

Broken or Faulty Locks

A locksmith can repair your upvc repair window lock or door lock if it is damaged or broken. They can fix hinges, striker plates, and locks for double glazing. They can also move the cylinder in order to correct any misalignment that may be causing your handle not to work properly.

If the key fits in the lock but it won't turn or is difficult to insert, the mechanism could be locked up. This can be caused by dirt or grime accumulating inside the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. It is crucial to make use of a dry lubricant like graphite or teflon, rather than oil, which attracts dirt and adhere to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should work through the mechanism, and the lock should be able turn with ease.

Screws that are loose within the lock mechanism are a different reason for a broken lock. They may loosen, fall out, or even break completely, preventing the lock to perform as it should. These screws can be tightened with a screwdriver, but you must be careful not to overtighten them. This could damage the internal components.

A faulty lock can be dangerous for you and your family, especially if you have young children. It's possible for them to open the door without your knowledge and thus give them access to your home. If you're worried that this might happen, a vetted professional locksmith can help you secure the double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing that can fix all types of faulty and damaged mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific needs, which means that in many cases replacement doors and windows are not necessary.

Handles that are damaged or broken

As part of their overall security plan, many double-glazed windows have a multipoint lock. This is a great option for those who are concerned about potential thieves who may try to gain access to your home. It is also a good idea to ask your installer about anti-lift blocks, these can be fitted on top of the locks that are already in place to ensure that your window is locked in a closed position.

Handle locks are usually damaged or fail. They are the first thing a criminal will utilize to force open your window. The good news is, this is among the easiest parts to fix.

Modern uPVC and aluminium handles operate a multi-point locking system known as Espagnolette that is designed to resist forced entry. This security upgrade is available as an option on new uPVC windows. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.

It is important to repair the handle as soon as possible after it has been damaged. The damaged handles could stop the window from closing properly and permit drafts to get in. It may also be a weak point that burglars with a plethora of opportunities might exploit, fitting placing your home and belongings at risk of theft.

To repair the damaged mechanism, you first need to access the window frame and then remove the damaged handle. The gearbox that opens the handle is then located and the model is identified so a replacement can be found that matches the profile of internal window frame mechanisms.

Once the mechanism has been replaced the handle can be re-attached with the original screws - but we would recommend replacing them with more long screws since this will provide a more secure fit. The final step is to apply a coating of clear sealant to protect the handle from further rust. Once that's done, your window will be operational again and at a fraction of the cost of replacing the entire window.

Broken or Faulty Hinges

If your windows don't shut properly, you could experience draughts, a weakening of your home's security barrier and a higher chance of damp or water damage. Windows hinges that break or become faulty are a common occurrence and can be easily repaired.

If your uPVC windows won't close or open it's likely that the hinges need to be replaced or repaired. Many window companies will require you to buy an entirely new window unit to resolve this issue, but we can replace the hinges and save you money.

Window hinges are usually damaged through repeated use, or weakened over time by corrosion. If you have a broken window hinge, it is essential to take steps to avoid further damage. This includes not causing the window to close or open.

Knowing the type of hinge you have will help you identify the correct parts to fix it. The most commonly used types of window hinges are Maco, Mila, Roto and other brands. It is recommended to speak with a professional in this case to avoid the mistake of purchasing parts that are not compatible with your current hardware and could cause further damage.

A faulty hinge is a major problem for uPVC windows and doors. They can be a major source of noise and can also allow water to infiltrate your windows.

To fix this issue, first check whether the pin barrel on both hinge halves is aligned. If not then tap the headpin using a hammer in order to create an incline in the hinge barrel. This will help keep the pin in the right position. Have a person hold the doors as you remove hinge screws and hinges. Replace the hinges using those that are of the same size, and install the screws with glue. Finally put the hinges in place using weights or clamps while the glue is drying.

After you have repaired the hinges, you can put the door back in place. You can also reattach the handle. It is a good idea to replace the screws using the same length of dowels as the original screw, so that they are in line with each one.

Broken or damaged glass

uPVC Windows can become damaged over time, even though they are excellent at keeping cold out and keeping heat. This can include broken or damaged glass, as well as faulty locks. If neglected, this could turn into a major expense. This can also detract from your home's aesthetics and cause a loss of insulation. It is essential to fix any damage as soon as it occurs.

You can repair the crack in your glass yourself if you have the appropriate tools and techniques. First, make sure that the area around the glass is free of debris so that any shards don't harm anyone and aren't an accident hazard. Then, remove the broken glass pieces and dispose of them in the appropriate manner. Then, apply masking tape to the entire area to prevent shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before gluing it in place is recommended in the case of windows with two panes. This will ensure you have enough room to finish your project.

Before applying the glue, clean the surface of the broken frame and glass with a a dry, clean cloth. Follow the curing and application instructions that differ from one product to the next. You may need to clamp the glass that has cracked with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.

When the adhesive has completely set, carefully place the glass into the window frame, fitting ensuring it's flush with the edges of the frame and there are no gaps between the glass and the window sash. Be careful not to bend the glass when you put it back in place, as this could weaken the seal. This can lead to condensation or water infiltration.

Get in touch with a professional glazier, such as O'Brien(r) to arrange an appointment to replace your glass if the window has been completely broken. If you leave broken glass unattended, it could pose a safety risk for children and pets, so it's essential to act quickly.