Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. If you have double glazing repair-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the distance between the door and the window is large, you might prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a number of problems such as sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. Then, remove both the top and bottom hinges with a screwdriver and uPVC repair adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you can't reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

upvc repairs handles can also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and do an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to act if you wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how serious the problem is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with the breeze. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical component hinges will wear out over time. It is essentially a very simple procedure, but it is easier to do when you have a person to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos through our website can often solve the issue. We are happy to give advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges can also be misaligned due to wear, creating a gap between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, may be misaligned. Again, it is possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next most common reason for draughts is window seals. These can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come the point when it's more economical to replace them than repair them. If you encounter any issues with your upvc window you should consult a professional as soon as you can.