How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don't be concerned. Replacing a upvc window handle is a relatively simple task and can be completed in just a few steps.

If you have a cranked or in-line espagnolette window handle, all of them have a square spindle bar that extends from the back plate and is slotted into the locking mechanism.

Identify the type and size of the handle and lock.

Over time, window handles or locks can get damaged and lose functionality. The good thing is that this can often be fixed without having to replace the entire uPVC window unit. One of the first things you need to do is determine the type of lock and handle you have to determine what parts will be required for replacement.

Identifying the type of handle can be identified by looking at the handle's base. There is the screw or pin that is holding the handle to its base. If the screw is gone it could be a sign the handle has split from the base. If the handle has split internally and isn't able to grip the spindle anymore it could be an indication that the handle needs to be replaced.

There are many uPVC handles, but the Espag handle is the most well-known. These are typically fixed using two bolts, and come with an articulating spindle that is connected to the lock mechanism inside the frame of the window. These handles are usually used on tilt and turn uPVC windows.

Another type of uPVC window handle is the Cockspur handle. They are similar to the Espag handles, but have a lower projection from the frame. These handles are generally used on older uPVC window frames.

Additionally, there are Venetian window handles that are similar to the Espag handle but they have an elongated base that allows them to be placed in a flush position with the frame. They are a great option for homeowners who want an elegant, stylish handle that blends with their uPVC window frames. These handles come in a range of colors that can be matched to any decor.

Measure the spindle

It's important to be aware of how the handle installed before you can order the replacement. This will tell you how tight or loose it is and if it will fit properly into the window frame. It is done by identifying what kind of handle you own and determining the spindle length. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle is available in a variety of sizes. The current standard for the industry is 8mm. Older handles may have 9mm of cross-section, therefore you'll need to take measurements of your old handle to ensure you get the correct size replacement.

There are a variety of window handles. The most popular are the inline Espagnolette handles and Cockspur handles. These handles operate a locking system in the window. They employ shootbolt rods to secure the window once it is closed. Depending on the type of handle they are held in place with screws or pins.

You can purchase Upvc handles that are replacement on the internet or at most DIY stores. They are available in various finishes and are suitable for new or replacement windows. They can also be key-locking or non-locking for extra security.

To take off your old handle, open the window and remove the screws that hold it in place. Keep the screws in a container to protect them from damage. After the screws have been removed, carefully remove the handle. Find the distance from the base of the spindle up to the tip. This will give you the information needed to buy the right replacement. The spindle of the handle is the metal shaft that connects it to a gearbox that locks the window frame.

Remove the old handle

Changing the handle of a uPVC window handle is a straightforward task and usually will take less than five minutes if you have the proper tools. The first step is to identify the kind of lock and handle, which will help you determine the best replacement. After that, weighing the spindle will ensure that the new handle is a perfect to the existing one. Finally, you'll need to remove the old handle and replace it with the new one.

The majority of uPVC handles are inline Espagnolette handles, which are equipped with central spindles that slot into the window's locking mechanism. These are generally easy to take off, but you may need to use force if they are stuck. The handle is usually fixed by two screws that you can remove using the help of a screwdriver. Depending on the kind of handle you have, you may also have to remove any pins holding it in place.

After removing the screws, you can take off the handle you were using previously. If the handle is unlocked and the top of the baseplate will be visible. It will reveal two additional screws that can be unscrewed. There's also a small silver or other color sticker that must be removed if it's still in place.

You can now put into the new handle using the screws from the old handle. Make sure that the screw holes are aligned on the window pane replacement to the holes in the handle. After this is done then you can replace the screw caps and test the new handle to make sure that it is working correctly. Changes to a window made of uPVC can be a quick and simple task, but you need to make sure you do it correctly.

Replace the handle with the new one.

If you've managed to take the handle off the frame, it's time to fit your new handle. Begin by locating the screw covers and levering them out with your screwdriver. Once the screw covers are removed, place them in a secure place before moving on to the next step.

Next, insert the new spindle into the handle by lining it up with the existing hole and Glaziers screwing it in. The holes on the handle to the holes in the window frame. Make use of a screw of the same size as the previous.

uPVC Espag handles are equipped with a square 7mm spindle that turns the lock mechanism that is attached to the window. This style of handle is found in most modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) have an extended nose that locks over the outer frame or transom bar cross member and are commonly found in older uPVC windows.

Once the new handle is in place, it's important to ensure that it operates correctly by locking and unlocking the window several times. If everything goes according the plan, the replacement uPVC handle should be securely fixed and operating smoothly. If you encounter any issues, these steps will help you to diagnose the problem and fix it swiftly. If you are struggling with your uPVC handle or any other issues with your home improvement using glazed do not hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers can repair or replace different window handles and frames. This makes us an excellent option for double glazing window replacement glazing.

Test the new handle

Over time and through normal use the uPVC locks and handles can suffer from damage and wear and tear. It can make them less secure and effective which is why it's important to replace them immediately. It's also an ideal idea to do this when you upgrade your windows, since changing the handle and lock will help maintain the integrity of your new windows.

There are a variety of uPVC window handles. Some are fixed with screws or pins while others are fitted with blades that slide into the lock mechanism. Each type has its own method of replacement, and it's important to know what type you have before working on it.

Espag window handles are the most well-known kind, and are typically found on newer uPVC windows. The spindle extends from the handle into the lock gearbox, and it activates the locking mechanism when you open the window. They're also simple to remove, but you should take care not to damage the mechanism or the handle while taking them off.

Cockspur window handles are another popular choice for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the wedge-shaped striker plates on the frame. This kind of handle may be more difficult to repair than other handles, but it's an excellent choice for most homes.

Venetian window handles are secured by two bolts and have a slim projection from the frame, unlike the Espag handle. These handles are perfect when you want to have a flush-fitting handle that blends in with uPVC window frames. They're a great choice for commercial and residential buildings.