Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement window handles are simple to install and feel as good quality. But it's important to understand that the type of handle you choose should be appropriate for your window replacement cost.

The primary factor is the step height that refers to the gap beneath the handle's nose to the base or frame. Other considerations include locking mechanisms and designs.

Replacement parts

There is a variety of replacement upvc window handles available for purchase. There are a variety of designs and colors to pick from, so you're bound to find one that will match your existing windows. It's easy to buy something on impulse especially when the handle is damaged. It is therefore advisable to do some research before purchasing an alternative. The first thing you should consider is the kind of upvc handle do you have now and what the difference between the kinds is. The table below lists the most common handles to help you choose the one that will fit your upvc windows.

The majority of double-glazed windows today have epag handles. They are usually affixed to the frame with two screws that screw into the frame from both sides, above and below.

The spindle bar at the back can be different in size, and will determine if they are left-handed or right-handed. It's important to take the measurements of the handle you currently must ensure that you get the correct replacement.

Usually, they are fixed with two bolts, similar to the Espag handle but they have a low projection from the frame which means that the handle won't poke through your blinds. This is a great option when you want the handle to blend in with your blinds and upvc windows.

Cockspur handles are similar to Espag handles but they have a nose that is closed over a wedge, which is placed on the window frame. This kind handle is found on some older wooden and upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated by turning the handle or pushing at the top of the window. This opens the window from the inside and lets you to clean the outside without having to climb to the ladder or walk over the fence. They are also an excellent option for those with limited mobility. They can be an excellent method to improve security and accessibility at home.

Tips and hints

A lot of people will need to replace their uPVC window handles at some moment. It is important to know a few tips and tricks that can aid in the process.

Examine the type of handle that is in your home. Based on the type of handle and locking mechanism, it might be necessary to replace the lock and handle. If the roller cams or shoot bolts (espags) are jammed, or getting stuck, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles are similar and follow industry standard sizing, which makes replacing them a relatively simple process. First, you must remove the screw covers on the handles. They are typically pozidrive screws. Once the screws are removed, you will be able to remove the handle.

It's a great idea to take note of how far the spindle protrudes from the base of your handle when you separate it. This will help you determine the length of the spindle to determine a replacement handle. Simply measure the amount that the square peg extends out of the bottom of handle.

This is particularly important for inline uPVC window handles because they are always straight and can only open from left or right, and they won't operate in the middle. It is a good idea if you're not sure of the kind of handle you have at your home to borrow a handle and see how it functions.

Another great tip for working out what the handed of the uPVC window handle is is to look at the way the handle rotates when operating. Handles can be turned either clockwise or counter-clockwise. If you aren't sure, ask someone to open the window using the handle and observe how it works.

Find the spindle's measurement.

It can be difficult to choose the appropriate replacement handle for your window as different handles do not have the same dimensions. It is important to measure the spindle accurately when fitting a new handle. This will ensure that the handle is suitable. There are a variety of uPVC handles that function in different ways. It is essential to identify the type you have, and what locking system you have.

Espag handles have a spindle that extends from the rear of the handle and goes into the lock gearbox inside the window frame. When you turn the handle, this then turns the lock in the gearbox and opens the window. They are typically used on uPVC windows with casement and can be locked with keys for extra security.

Cockspur handles feature a "nose" that closes over a wedge-shaped striker block on the frame and they are commonly found on older double glazing replacement window-glazed uPVC windows. They are also quite simple and they can be locked with keys. It can be more difficult to replace these handles as they are less common than the handles with espagnolette.

If you have an open tilt and uPVC Replacement Window Handles turn uPVC window then you will need to get a special kind of uPVC replacement handle that has an entirely different locking mechanism. It can open the window, but also rotate it around to fully open it. You must ensure that the handle you pick has a spindle length at least 55mm, or it won't be able to get into the window frame.

The same method can be used to remove and replace the uPVC handle. However, you will have to be careful when you remove it. It might be necessary to open the window a bit wider than normal to access both screws that secure it to the frame. Once you have put in your new uPVC handles and verified that they are in the right position then tighten the screw covers and test the lock to ensure it is working properly.

Fit the new handle

If you have the proper handle replacement, it's going to simply screw into place. It will require a screwdriver and an electric one may be a lot easier. When screwing the screws in, it is crucial not to over tighten the screws as this could cause the handle to warp or crack.

Another important step to take when fitting the new handle is to install the spindle. The spindle is the component which runs through the handle to operate the locking mechanism of the window. It is essential that it is installed correctly since this will ensure the window is able to be opened and closed securely.

There are a myriad of different kinds of uPVC handles. There are various kinds of window handles made of uPVC.

Espagnolette Handles are inline handles which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle however they feature a curved design that can be useful for uPVC Replacement Window Handles windows that are difficult to reach.

Tilt and Turn Handles - these are used on tilt and turn windows to operate the opening and closing mechanisms.

The majority of uPVC window frames are fitted with these. In the UK they are often called "Bay Windows".

If your uPVC window handle is damaged, it can be very frustrating. There is no need to replace the entire uPVC windows because of a damaged window handle. There are a few easy steps you can follow to fix or replace a broken uPVC handle.

By identifying the kind of window you have, calculating the length of the spindle, and then purchasing the replacement handle, you can fix the broken window handle. It is crucial to take your time and prioritise security when working with windows and tools but this is a simple task. It could mean the difference between having a secure and secure home, or a window that can be easily opened. Bridgewater Glass is the place to visit if you have any questions or want to speak with an expert about replacing your window handle. We have a team of highly experienced and knowledgeable experts who can assist with any issues you might be having.