Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. If windows with double glazed window repairs panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards will fall on the fabric rather than on the floor where they can be trodden under and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap between the door and the window is large, you might need to consider security screens that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of problems including sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and test it for fit. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and then perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the caulking used previously may require removal before a new layer can be put on. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It's very simple to change a window hinge however it is easier if someone helps hold the frame.

Verify that the uPVC hinges are closed and open in the right direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or by improper installation in the factory. Sending us photos via our website will often solve the issue. We are happy to give advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, which can cause gaps where the sash and frame meet. These can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to get them aligned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge's side, and may need to be cleaned. In some instances, it may be necessary to replace them.

The next most common reason for draughts is window seals, these are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as you can.