Repairs to uPVC Windows

upvc window repairs windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need open the window to access the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's important to take action. Windows that leak water do can not only cause degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

Make sure that the uPVC hinges open and UPVC window repairs close in the correct direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, may become displaced, which causes gaps to develop between the sash and the frame. This can be easily repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to get them re-aligned or replaced. In addition, the interlock could be misaligned. This is located on the hinge's side and could require to be cleaned. In some cases it is possible to replace them.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and uPVC window repairs repairs. However, it is important to recognise that all windows have a life span and there may come the point when it's more efficient to replace them than fix them. If you have any problems with your upvc window you should consult an expert as soon as you can.