Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or UPVC repair timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this instance, you will need to source some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you plan attempt to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc repairs is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll need to open the window so that you can access the frame. With an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles could also loosen. Often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and then perform an experiment fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will make your window harder to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is very easy to change a window hinge however it is easier if someone else helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to offer assistance.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be misaligned due to wear, causing gaps where the sash meets frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them realigned or replaced. The interlock may be disaligned. This happens on the hinge's side, and could require to be cleaned. In some instances, it may be necessary to replace these.

The next most common reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than fix them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as you can.