Locked Keys in Car? Here's How to open car Your Car Without Damage

If you've locked your keys in your car, don't panic. There are numerous techniques you can try prior to calling a locksmith or roadside assistance service.

For instance, you could, use a shoelace with an elastic slip knot to lift a post lock. Or you can untwist a coathanger wire and then shape it into hook. You can also make use of a door wedge or an inflatable wedge.

Pump Wedge

If you've been stuck in a locked car and none of the DIY methods like shoestrings, wire hangers or wedges work, it's time to contact an expert. A locksmith or repo service provider might have special lockout equipment that can help you unlock your car without damaging it.

Make use of them properly If they are available. Know where to insert the wedge tool. Many people put the wedge tool in the upper corner of a door which is the most vulnerable. This is a bad idea, since you are likely to damage the weather stripping or the wires inside the door. Instead, put the wedge in the largest portion of the gap that you can see and in the area where it has the most leverage.

The Pump Wedge is an inflatable wedge made from high-quality vinyl that doesn't damage the surface. It is able to slide between the vehicle door and the door frame, and is then inflated to create a space which allows you to insert other tools, such as a long-reach car opening tool rod. It has a hook on the other end that you can make into a shape to hold the latch on the door handle.

A less costly version of this is a pair made of wooden door stops. They can be put on the rear of the door to pry the gap wide enough for rods. You can also use a slim Jim, a thin metal strip which is bent into a hook, and then used to attach the lock. This method requires practice, however, since you should be cautious not to break the weather stripping of the door.

Another alternative is to use a shoelace, but this only works with older cars that don't have a push button unlocking mechanism. You can tie a knot in the middle and then move the lace upwards and downwards along the door seam until you locate the latch. After that, maneuver the lace until it is in contact with the lock, tighten the slip knot, and pull it upwards. This method can be more difficult than other ones and could scratch the paint or damage the door trim if not careful.

Inflatable Wedge

You can easily unlock your car with an inflatable wedge-shaped door opener. This will free you from having to use prying tools or slim jims. The wedges can be positioned between the frame and window of the car and when they are inflated, they create a large opening to place a tool that has a long reach such as a button grabber or slim jim. This method is much less dangerous than using a screwdriver and is a viable option even if you don't have access an screwdriver.

Another option to unlock a car without damaging its interior or exterior is to use a wire coat hanger which has been cut into a hook shape. It can be used to secure the lock and could be more effective than a flat screwdriver because it is less likely to cause damage to the paint on the car. It is still recommended to look at the other doors to ensure there is no other way to gain access to the door.

You can also use a plastic bag twisted into a noose or V-shaped shape. Be careful not to tear the bag as it could make things worse. This trick is especially useful in the event that you cannot locate the lock button. This trick is not as reliable as a wedge, or a coat hanger, but it could help you in an emergency.

Be calm and put safety first. Luckily, there are several options to solve this kind of issue. If you study this article, you can be ready for any scenario that may come your way. You can unlock your vehicle by following our steps. This will avoid unnecessary damage and stress. If you're able, take your keys with you when you leave your car.

Shoelace

It's one of those "oh crap!" moments that can cause a lot of trouble. It's best to have a few items that you can use to unlock your car without breaking any windows. These items are easily accessible and will help you save money on locksmiths, or the time required to get roadside assistance.

A shoelace or twine can be used to unlock a car. It's simple to use and can be used on a variety of cars. The most important thing to consider is a car equipped with post locks. They can be stacked vertically on the window sill and easily accessible from outside the car. To get the job done make use of a shoelace create a slip knot and move it into the crack between the window frame and the door. Once the slip knot is put in place, pull the two ends of the string upwards to pull it tighter.

This technique is more effective for older vehicles, and might not work on modern models that have a hook inside lock. If you have a screwdriver handy to use, you can use it to unlock the door more forcefully. Another option is to grab the pole from a nearby object, such as a doorframe or piece of wood, and then stick it inside the window frame to make an opening for the rod you'll use to push the lock's interior button.

Although the methods above might be relatively safe for many drivers, it's best to seek help if you can. This can help avoid further damage to the vehicle and decrease the chance of an accident due to stress. If you don't have a cell phone or cannot call for help, it is important to notify trusted family members and acquaintances know where your vehicle is parked. Also having a spare set of keys can be kept in an easily accessible location in the vehicle so that you can access them when needed.

Wire Hanger

It's a gruelling situation to put your keys in your car. However, the trick is to stay calm and think about the options to retrieve them. This will prevent you from creating a worse situation and this can happen in the event of panic.

One of the best things you can do is use a modified wire coat hanger to get back in your vehicle. You'll have to unravel the coat hanger wire to make a straight end with a hook that you can use to move your lock rod. Once you can reach the rod that locks your door, you should be able to pull it up to allow you to open the door.

You can also use a rod, or even metal pieces from your vehicle. It is important that you make sure you don't cause any harm to the vehicle during this process and it is best if you can do so without having to take the car apart. This method will work better for older cars than modern ones. However it is possible to use it on models with unique outer door handles.

You can perform the same thing with a shoestring tied in a slip knot. This will work on a postlock, but is more difficult to maneuver since you'll rely on the tension of the string to grab it. It is possible to do this by threading a shoestring through the small hole you create in the weatherstripping on your vehicle's doors. After the string is in you can pull it in a tight manner to form a loop that will snap around the lock and allow you to pull it out. This method can be very efficient if you're lucky enough to find the lock in the correct location.