Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the door and the window is substantial, you may want to use a security screen that also has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It's important to take action when you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sagging. You'll first need to open the windows to access the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. You'll first need to close the window and perform a test fitting. The corners of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the old caulking may need to be removed before a new layer is applied. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze It could be hinges at the fault. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change a window hinge however it is easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used since they could damage your upvc window repair windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges can also become misaligned due to wear, creating a gap between the frame and sash. If they are beyond repair, it could be necessary to have them realigned. Second, the interlock can also become misaligned. This happens on the hinge side and may need to be cleaned. In some cases it might be necessary to replace the hinges.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be positioned on top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc window repair will continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be more cost-effective to replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.